AMP(Alternative Maritime Power)
As for global warming, the age is chased, it becomes a serious problem, and an effective, appropriate measures is requested immediately in the ship and the harbor equipment.

And, the American west shore and the Los Angeles port concentrated on a large-scale containership, and introduced AMP in shape to lead the world.

However, there seem to be a lot of problems in unification to all ships and the harbor
equipment on the technology and the cost side, too.


Especially, the device that repatriates, and unloads the cable is important.
This should make some models.

The ship kind, and it is the best selection and in each harbors. and safety, easily, and judge the cost etc. overall

It is thought that the cable laying machine that introduces it here is accumulation of the technology in this field over many years,

and some proposals can be done. That is, it is convinced that there is a technical base that can be answered enough on safety, operativeness, and the cost side irrespective of the kind of the ship, the bigness and smallness of the ship, and the harbor equipment.

・Executed facilities are several ten million yen
. ・If it is ballroller, it is millions of yen
AMP Consideratione.pdf

Japanese
Drive system
electric wire construction
Underground cable
electric power wire
Communication wire
Shipyard
Drum drawing out and rolling machine
Winch
Others
Semi-welding robot
Mooring
Fish net
Corporate profile
・AC 220V 3φ Servo motor or inverter decelerator motor

・AC 440V 3φ Servo motor or inverter decelerator motor

・6kg Compressor air With brake

・Oil drive motor
Many kinds of tires corresponding to traction
・Traction 200kgf (1,960Nf)Outside diameter of Tire Φ150 Φ180 
・Traction 500kgf (4,900Nf)Outside diameter of Tire Φ230 Φ300 
・Traction 1,000kgf(9,800Nf)Outside diameter of Tire Φ350 Φ450 
Introduction of standard model according to type

Containership, tanker ship, LNG ship, bulk ship, cruise ship, and ferry ship, etc.
A separate, best shore supply facilities are thought respectively.

One example (an electric type, the air type, and the oil pressure type) is shown as follows. Some standard types can be produced according to needs of the site.




If you do by "Alternative maritime power" and the input with Google
and Yahoo

AMP of the CABOTEC Co. can be confirmed.

Electric, driving type
・The tire can be opened and shut with the wheel. Therefore, if it is an electric
 wire of Φ70 in the outside diameter, it pulls it at a time even by 3〜4pcs.
  If it is three aspect stranded wire, it is possible to construct it also with Φ150.

The motor and the tire can be designed best according to the electric wire load.

It is possible to produce it the auto tension function and with the brake function.
 
AMP Consideratione.pdf
φ150
Feature of EB2R-300B-200S
1 Tire diameter φ300×1 opens and shuts electrically. And, the width of the maximum opening is 205mm.
2 Two feeding power cables of the containership (outside diameter Φ70) can easily pull .
3 Traction is continuousness 850kgf rated speed 8m/min (inverter control).
4 Weight is 110kg.
It is the maximum traction one ton for
a short time.
 
6Kg air drive type
・The tire can adopt wheel opening and shutting as well as an electric   

・The motor and the tire can be designed best according to the wire
 weight

・It is possible to produce it the auto tension function and with the
 brake function.

・There are excelling in the waterproof and the explosion-proof.
 
Oil drive type 
・The tire can adopt the opening and shutting function as well as an
 electric type.

・The motor and the tire can be designed best according to the
 electric wire weight

・It is possible to produce it the auto tension function and with the
 brake function.

・There are excelling in the waterproof and the explosion-proof.
        

Ballroller is the best for the electric wire construction. Because

  1 The ballroller tire is filled by air pressure 200KPA at the car level.

    The tire dents for 3φ cable, and the electric wire is encompassed
     by even power and pulled. Therefore, there is no accident that the
     surface flakes off at all.
 
  2 The ballroller needs neither the winch nor the reel because it can
     do the middle sending of the electric wire.
  
   3 Because the middle sending of the electric wire can be done, the ball
     roller can be stored in the shape of
8. It doesn't take up space
     and the installation cost can be suppressed to few.

   The electric wire doesn't twist and the shape of 8
    can be stored.

What is the outline of facilities using ballroller ?

@  The cable storage facilities can be freely selected even in the quay side
   and the ship'side. However, the cable is repatriated, and the ballroller
   machine thinks that the ship's side installation is good because of the
   necessity of the pull wholesale.

   However, the storage of the cable is not set up on the quay side either.

A  The reel is unnecessary in pull ballroller on the way.
   It becomes unnecessary the peel therefore ..an expensive reel winch
   and the collector ring...

   Moreover, a terminal special connector becomes unnecessary on the side
   where the cable is always pooled, too.
   There is no problem in a cheap general terminal. Only the side where the
   cable is gotten is made a special connector.

B Because free steel BOX is set up according to the size and the amount
  of the cable, and the cable is stored in shape of 8
  that. Shape of 8 storage is assumed to be the one that the manual
  operation and the automatic operation(International Patent) can be done .
  

  
My confirmation experiment on shape of 8

Please prepare the belt of trousers.
And, please test whether to come in succession in the state of the shape of 8 on the way of the belt.

Next, one side is similarly fixed.Please try whether to pile up to the circle on the way of the belt and to be
able to put it.


How about  (^ム^)

Was the experiment success done? (^^♪

Image of shape of 8
It lands naturally without the twist. Moreover, it lifts without the twist.

Sample cable:
Length 30m 3c of outside diameter Φ50
(2.4m × 1m  4 pile)
 
AMP Consideratione.pdf
Please Mail for uncertain point

Copyright(C) 2003 Koyodragon Inc. All Rights Reserved.